remotes
Projector Remote: Viewsonic:
To Turn Projector "ON":
Push RED POWER button once, wait for 30 seconds to boot up.
To Select Input:
Push "Menu"
navigate to select input:
HDMI 1
push "Enter"
To Turn Projector "OFF":
Push RED POWER button once,
wait 1 second for window that asks "confirm"
push RED POWER button again
to turn unit off.
NEUMI Player Remote:
To find a movie push the blue “FILE” button and the next window shows one or multiple folders.
Those contain all the movie files. Click on a folder to open and select the movie to play.
Kogata Mini Projector Remote:
Turn "ON" Projector:
Push RED POWER button, wait for 30 seconds
Push upper right button "Input Select", wait 5 seconds for next window to pop up. Then push "Right Arrow" once to navigate to HDMI.
Push "OK" to select HDMI input.
NEUMI PLAYER
Set Up & Wiring:
The NEUMI single HDMI output video player works with a USB drive or standard size SD card. The power supply plugs into the DC 5V power input, the HDMI output is for the HDMI cable to the projector. The orange ringed jack is the audio output port and should not be used!
Choose between a USB Drive or a USB Stick or a standard SD Card.
Power Supply for NEUMI Player
selecting a movie
1. NEUMI Main window
To find a movie file push the blue “FILE” button on the remote.
2. The next window shows one or multiple folders. Those contain all the movie files. Click on a folder to open and select the movie to play.
3. NEUMI Movie File in Folder
To play / loop only one movie at the time: select a single movie in folder and hit “OK”.
To play / loop multiple movies select a folder with multiple movies and it will play them all in a row, starting again with the first one after it finished the last one.
troubleshooting - if there is no movie playing :(
• First verify projector is turned on.
• Then check if there is a blue or red light on the NEUMI player.
• If there is no light at all, the power cable or power supply to the player is disconnected.
• If the light in the player is red, it needs to be turned it on again (after power outage or disconnecting)
• If the light is blue but there is no movie playing: either
the projector is turned off,
or switched to the wrong HDMI input
or the HDMI cable is disconnected.
• If it shows a “MAIN NEUMI window” but no movie playing, navigate to the folder to select movie.
• NEVER hesitate to call - we are always here to help